Katmanlı imalat yöntemiyle üretilmiş Ti-6Al-4V alaşımının mekanik özelliklerinin incelenmesi / Fırat Memu ; thesis advisor Nuri Durlu.

By: Memu, Fırat [author]
Contributor(s): Durlu, Nuri [advisor] | TOBB Ekonomi ve Teknoloji Üniversitesi. Fen Bilimleri Enstitüsü
Material type: TextTextLanguage: Türkçe Publisher: Ankara : TOBB ETÜ Fen Bilimleri Enstitüsü, 2019Description: xvi, 74 pages : illustrations ; 29 cmContent type: text Media type: unmediated Carrier type: volumeOther title: Investigation of mechanical properties of Ti-6Al-4V alloy produced by additive manufacturing [Parallel title]Subject(s): Tezler, Akademik | Katmanlı imalat | Elektron demetiyle ergitme | Ti-6Al-4V | Mekanik özellikler | Additive manufacturing | Electron beam melting | Ti-6Al-4V | Mechanical propertiesOnline resources: Ulusal Tez Merkezi Dissertation note: Tez (Yüksek Lisans)--TOBB ETÜ Fen Bilimleri Enstitüsü Ağustos 2019 Summary: Havacılık, savunma, otomotiv ve biyomedikal sanayisinde kullanılan Ti-6Al-4V parçalar, atık malzeme miktarının en düşük seviyede olduğu toz bazlı katmanlı imalat yöntemlerinden elektron demetiyle ergitme (EDE) yöntemi ile mekanik özellik değerleri korunarak karmaşık şekilli üretilebilmektedir. Bu çalışmada, Arcam Q20 Plus EDE tezgâhı kullanılarak yatay ve dikey yönlerde, farklı ölçülerde üretilen Ti-6Al-4V alaşımlarının mekanik özellikleri incelenmiştir. EDE yöntemi ile üretilen blok, ofset ve standart boyutlarda (çap 15mm, 7.5mm, 6mm) çekme numunelerinin üretim sonrası yoğunluk ve yüzey pürüzlülükleri ölçülmüş ve üretim boyutu azaldıkça yoğunluğun azaldığı, pürüzlülük değerinin arttığı gösterilmiştir. Üretilen numunelere standart ölçülerde (çap 6mm) çekme testleri yapılmıştır. Blok ölçülerde üretilen numunelerin çekme özellikleri üretim yönü ve üretim konumu fark etmeksizin ofset ve standart ölçülerdeki numunelere kıyasla daha yüksektir. Çekme testi sonrası incelenen kırık yüzeylerdeki gözenek ve gevrek kırılma bölgeleri elde edilen çekme testi sonuçlarını desteklemektedir. Numunelere uygulanan mikrosertlik testi ile üretilen parçanın kenar bölgesinin merkezinden daha yüksek sertliğe sahip olduğu ve blok ölçülerde üretilen numunelerin merkezinin ofset ve standart ölçülerdekine göre daha düşük sertlikte olduğu belirlenmiştir. Numunelere uygulanan metalografik inceleme sonrası, Ti-6Al-4V numunelerinde üretim sonrası yavaş soğuma nedeniyle α tane sınırı ile yapraksı α + β mikroyapısı gözlenmiştir. Numunelerin sertlik değerlerini destekleyici olarak kenar bölgedeki α levha kalınlığının merkez bölgesine göre daha ince olduğu ve blok numune merkezindeki en yüksek α levha kalınlığının 1.7 μm olduğu belirlenmiştir. Ayrıca EDE yönteminde kullanılan Ti-6Al-4V alaşım tozunun üretim öncesi ve sonrasında karakterizasyonu yapılmıştır. EDE ile üretim sonrasında elek altında kalan tozların ortalama boyutlarının azaldığı ve sadece bu alaşım tozlarının bir sonraki üretimde kullanılabileceği belirlenmiştir.Summary: Ti-6Al-4V parts used in aerospace, defence, automotive and biomedical industries can be produced in a complex shape by maintaining the mechanical properties by electron beam melting (EBM) method which is one of the powder based additive manufacturing methods with the lowest amount of waste material. In this study, mechanical properties of Ti-6Al-4V alloys produced by using Arcam Q20 Plus EBM machine in different dimensions in horizontal and vertical directions were examined. Density and surface roughness of the samples produced by EBM method were measured and it was shown that density decreased, and the roughness value increased as the production size decreased. Manufactured samples were subjected to tensile tests in standard dimensions (diameter 6 mm). Regardless of the production direction and production position, the tensile properties of the samples produced in block sizes are higher than those of offset and standard sizes. The pore and brittle fracture zones on the fracture surfaces examined after the tensile test confirm the obtained tensile test results. The microhardness test applied to the samples showed that the edge region of the part had higher hardness than the center, and the center of the block samples had a lower hardness than the offset and standard dimensions. After metallographic examination applied to the samples, Ti-6Al-4V samples are dominated by the α grain boundary and the lamellar α + β microstructure due to slow cooling after production. It was observed that the thickness of the α plates in the edge region was thinner than the central regions and the highest α plate thickness (1.7 μm) was obtained in the center of block sample as a support for the hardness values of the samples. In addition, Ti-6Al-4V alloy powder used in EBM method was characterized before and after production. After the production with EBM, it was determined that the average size of the powders remaining under the mesh decreased and only these alloy powders can be used in the next production.
Tags from this library: No tags from this library for this title. Log in to add tags.
    Average rating: 0.0 (0 votes)
Item type Current location Home library Collection Call number Copy number Status Date due Barcode
Thesis Thesis Merkez Kütüphane
Tez Koleksiyonu / Thesis Collection
Merkez Kütüphane
Tezler TEZ TOBB FBE MAK YL’19 MEM (Browse shelf) 1 Ödünç Verilemez-Tez / Not For Loan-Thesis TZ01061

Tez (Yüksek Lisans)--TOBB ETÜ Fen Bilimleri Enstitüsü Ağustos 2019

Havacılık, savunma, otomotiv ve biyomedikal sanayisinde kullanılan Ti-6Al-4V parçalar, atık malzeme miktarının en düşük seviyede olduğu toz bazlı katmanlı imalat yöntemlerinden elektron demetiyle ergitme (EDE) yöntemi ile mekanik özellik değerleri korunarak karmaşık şekilli üretilebilmektedir. Bu çalışmada, Arcam Q20 Plus EDE tezgâhı kullanılarak yatay ve dikey yönlerde, farklı ölçülerde üretilen Ti-6Al-4V alaşımlarının mekanik özellikleri incelenmiştir. EDE yöntemi ile üretilen blok, ofset ve standart boyutlarda (çap 15mm, 7.5mm, 6mm) çekme numunelerinin üretim sonrası yoğunluk ve yüzey pürüzlülükleri ölçülmüş ve üretim boyutu azaldıkça yoğunluğun azaldığı, pürüzlülük değerinin arttığı gösterilmiştir. Üretilen numunelere standart ölçülerde (çap 6mm) çekme testleri yapılmıştır. Blok ölçülerde üretilen numunelerin çekme özellikleri üretim yönü ve üretim konumu fark etmeksizin ofset ve standart ölçülerdeki numunelere kıyasla daha yüksektir. Çekme testi sonrası incelenen kırık yüzeylerdeki gözenek ve gevrek kırılma bölgeleri elde edilen çekme testi sonuçlarını desteklemektedir. Numunelere uygulanan mikrosertlik testi ile üretilen parçanın kenar bölgesinin merkezinden daha yüksek sertliğe sahip olduğu ve blok ölçülerde üretilen numunelerin merkezinin ofset ve standart ölçülerdekine göre daha düşük sertlikte olduğu belirlenmiştir. Numunelere uygulanan metalografik inceleme sonrası, Ti-6Al-4V numunelerinde üretim sonrası yavaş soğuma nedeniyle α tane sınırı ile yapraksı α + β mikroyapısı gözlenmiştir. Numunelerin sertlik değerlerini destekleyici olarak kenar bölgedeki α levha kalınlığının merkez bölgesine göre daha ince olduğu ve blok numune merkezindeki en yüksek α levha kalınlığının 1.7 μm olduğu belirlenmiştir. Ayrıca EDE yönteminde kullanılan Ti-6Al-4V alaşım tozunun üretim öncesi ve sonrasında karakterizasyonu yapılmıştır. EDE ile üretim sonrasında elek altında kalan tozların ortalama boyutlarının azaldığı ve sadece bu alaşım tozlarının bir sonraki üretimde kullanılabileceği belirlenmiştir.

Ti-6Al-4V parts used in aerospace, defence, automotive and biomedical industries can be produced in a complex shape by maintaining the mechanical properties by electron beam melting (EBM) method which is one of the powder based additive manufacturing methods with the lowest amount of waste material. In this study, mechanical properties of Ti-6Al-4V alloys produced by using Arcam Q20 Plus EBM machine in different dimensions in horizontal and vertical directions were examined. Density and surface roughness of the samples produced by EBM method were measured and it was shown that density decreased, and the roughness value increased as the production size decreased. Manufactured samples were subjected to tensile tests in standard dimensions (diameter 6 mm). Regardless of the production direction and production position, the tensile properties of the samples produced in block sizes are higher than those of offset and standard sizes. The pore and brittle fracture zones on the fracture surfaces examined after the tensile test confirm the obtained tensile test results. The microhardness test applied to the samples showed that the edge region of the part had higher hardness than the center, and the center of the block samples had a lower hardness than the offset and standard dimensions. After metallographic examination applied to the samples, Ti-6Al-4V samples are dominated by the α grain boundary and the lamellar α + β microstructure due to slow cooling after production. It was observed that the thickness of the α plates in the edge region was thinner than the central regions and the highest α plate thickness (1.7 μm) was obtained in the center of block sample as a support for the hardness values of the samples. In addition, Ti-6Al-4V alloy powder used in EBM method was characterized before and after production. After the production with EBM, it was determined that the average size of the powders remaining under the mesh decreased and only these alloy powders can be used in the next production.

There are no comments for this item.

to post a comment.
Devinim Yazılım Eğitim Danışmanlık tarafından Koha'nın orjinal sürümü uyarlanarak geliştirilip kurulmuştur.