000 03279nam a2200433 i 4500
999 _c200447134
_d65346
003 TR-AnTOB
005 20230908000958.0
007 ta
008 171111s2021 xxu e mmmm 00| 0 eng d
035 _a(TR-AnTOB)200447134
040 _aTR-AnTOB
_beng
_erda
_cTR-AnTOB
041 0 _atur
099 _aTEZ TOBB FBE MNT YL’21 BİL
100 1 _aBilgin, Taha
_eauthor
_9135378
245 1 0 _aKorozyon önleyici uygulamalar için grafen oksit - epoksi baz astar nanokompozit kaplama geliştirme /
_cTaha Bilgin; thesis advisor Zeynep Tutumlu.
246 1 1 _aDevelopment of graphene oxide - epoxy base primer nanocomposite coatings for anti-corrosion application
264 1 _aAnkara :
_bTOBB ETÜ Fen Bilimleri Enstitüsü,
_c2021.
300 _ax, 47 pages :
_billustrations ;
_c29 cm
336 _atext
_btxt
_2rdacontent
337 _aunmediated
_bn
_2rdamedia
338 _avolume
_bnc
_2rdacarrier
502 _aTez (Yüksek Lisans Tezi)--TOBB ETÜ Fen Bilimleri Enstitüsü Ağustos 2021
520 _aGrafen oksitin (GO) kromat içermeyen epoksi baz astarın (EBP) korozyon önleme direncine olan etkisi araştırılmıştır. Nanokompozit kapmalar, ağırlıkça %0,25, %0,5, %0,75 ve %1 GO içerecek şekilde hazırlanmış ve kaplama kalınlığı 50 µm'yi geçmeyecek şekilde uygulanmıştır. GO kullanılmadan önce Taramalı Elektron Miktoskobu (SEM), Raman Spektroskobisi ve Fourier Dönüşümlü Kızılötesi Spektroskopisi (FTIR) kullanılarak karakterize edilmiştir. Optik tensiyometre ile ölçülen yüzey gerilim açıları, GO – EBP nanokompozitlerin, yalın EBP kaplamaya göre daha hidrofobik olduğunu göstermiştir. En yüksek yüzey gerilim açısı ağırlıkça %0,75 GO içeren nanokompozit kaplamada elde edilmiştir. Kaplamanın korozyon direncinin analiz edilebilmesi için Tuz Sisi Püskürtme testi gerçekleştirilmiştir. Kaplamanın termal davranışı Diferansiyel Taramalı Kalorimetre (DSC) ve Termogravimetrik Analiz (TGA) ile incelenmiştir.
520 _aThe effect of graphene oxide (GO) on the corrosion protection of non-chromate epoxy base primer (EBP) was investigated. Nanocomposite coatings, less than 50 µm thickness, were prepared adding various amount of (0.25, 0.5, 0.75, 1 wt%) GO and characterized using Scannig Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) and Raman Spectroscopy. Contact angle measurement results revealed that GO – EBP nanocomposites are more hydrophobic than neat EBP. The higher contact angle result was obtained for EBP containing 0.75 wt% of GO. Optical tensiometer and salt spray fog testing were used to charactarize the protection performance of coatings. The thermal behaviour of the coating had been investigated by using Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA).
653 _aGrafen oksit
653 _aEpoksi
653 _aKorozyon
653 _aNanokompozit
653 _aKaplama
653 _aGraphene oxide
653 _aEpoxy
653 _aCorrosion
653 _aNanocomposite
653 _aCoating
700 1 _aTutumlu, Zeynep
_9135379
_eadvisor
710 _aTOBB Ekonomi ve Teknoloji Üniversitesi.
_bFen Bilimleri Enstitüsü
_977078
942 _cTEZ
_2z